Check before you pour
Start with the plant’s name and its moisture needs. A succulent and a fern should not share a watering rule simply because they sit on the same shelf. Check the mix below the surface where practical, then lift a manageable pot to learn how it feels as it dries. For a heavy pot, compare conditions in more than one accessible spot rather than judging only a dry crust.
Give water a way out
Use an inner pot with drainage holes. Take a manageable pot to a sink or another protected place, water the mix evenly and let excess water drain. Empty the saucer or decorative outer container before putting the plant back. Standing water is not a reserve that every plant can safely use.
Watch the whole pot
If water immediately runs down the sides while the center remains dry, the mix may not be wetting evenly. Check instead of assuming fast runoff means the job is done. Follow species-specific advice for rehydrating dried mix. Repeated tiny splashes can leave part of the root ball dry while making the top look watered.
Keep a short care note
Record the check date, whether the mix felt damp or dry, and whether you watered. This records observations; it is not a promise to repeat the interval. Add a note when you move the pot, turn on winter heating or repot. Light, temperature, humidity and container size all influence water use.
Check before responding
Before responding to drooping with more water, check moisture: a wilted plant is not proof of dry roots. If the mix stays wet unusually long, inspect drainage and seek advice for that species. Move on to the container guide below if you cannot easily see where runoff goes.
Sources & further reading
Sources checked November 18, 2026. Follow the care or safety instructions supplied with your specific product.


